Roland AR-3000R 用户手册
33
Cards Compatible with the AR-3000R
Basic Operations
9
To quit saving, in step 8, turn the SELECT dial to choose
“END,” then press the dial.
“END,” then press the dial.
fig.07-g03e
10
When the prompt appears on the screen, press the ENTER
button to enable the settings.
button to enable the settings.
To quit without making the settings, use the SELECT dial to choose “NO,”
then press the ENTER button.
then press the ENTER button.
• When you’re finished making the setting, the display returns to the
setting item selection screen.
11
Press the MODE button. This ends the setting process and
returns you to the usual screen.
returns you to the usual screen.
* While making the settings, you can go back to the previous entry position
(highlighted) by using the PAUSE (BACK) button.
* If you press the MODE button while making settings, a message asking you to
confirm that you want to exit the setting process appears. Note that if you choose
“YES,” then press the ENTER button, you are returned to the usual screen, and all
setting changes you’ve made up to that point will be discarded.
“YES,” then press the ENTER button, you are returned to the usual screen, and all
setting changes you’ve made up to that point will be discarded.
Important Notes on Handling Cards
●
When Inserting
Securely insert the card as far as it will go into the card slot.
●
When Removing
To remove a card, press the eject button.
Never attempt to remove a card while the card access indicator is
illuminated.
illuminated.
Also, do not switch off the power or unplug the power cord while the card
access indicator is illuminated. Doing so may damage the card.
access indicator is illuminated. Doing so may damage the card.
931
* Carefully insert the Memory card all the way in—until it is firmly in place.
AR-3000R_e.book 33 ページ ２０１０年３月１８日 木曜日 午後２時６分