Roland AR-3000R 用户手册
84
Recording and Playing MIDI Data
Playback of MIDI Phrases
Selection of MIDI Output (OUT/THRU)
This changes the function of the MIDI output connector.
Here, select OUT.
Here, select OUT.
OUT:
This sends out MIDI information from the unit. Select
this when you want to play back MIDI phrases or send
Exclusive (SysEx) messages.
Exclusive (SysEx) messages.
THRU:
This takes MIDI information from MIDI IN and sends
it out unchanged. MIDI signals from the unit are not output.
Procedure for Setting MIDI Output
1.
Press the MODE button. The MODE indicator lights up.
2.
Use the SELECT dial to choose “6.1 MIDI Output,” then
press the dial.
press the dial.
3.
Turn the SELECT dial to choose the MIDI Output (OUT),
then press the dial.
then press the dial.
fig.13-g02e
4.
When the prompt appears on the screen, press the
ENTER button to enable the setting. To quit without
making the settings, use the SELECT dial to choose
“NO,” then press the ENTER button.
ENTER button to enable the setting. To quit without
making the settings, use the SELECT dial to choose
“NO,” then press the ENTER button.
When you’re finished making the setting, the display returns
to the setting item selection screen.
to the setting item selection screen.
5.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
screen.
* If you press the MODE button while making settings, a
message asking you to confirm that you want to exit the
setting process appears. Note that if you choose “YES”, then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
setting process appears. Note that if you choose “YES”, then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
Setting the Playback Tempo
This sets the speed for playback of MIDI phrases in beats per
minute (a tempo of from 5 to 260). The setting is made for
individual phrases.
minute (a tempo of from 5 to 260). The setting is made for
individual phrases.
* In MIDI recording on the AR-3000R, the tempo when
recorded is assumed to be 120. (Tempo information is not
stored.)
stored.)
The setting for the MIDI playback tempo is made with a
phrase setting. Refer to “Changing the Playback Tempo for
MIDI Phrases (MIDI Playback Tempo)” (p. 60).
phrase setting. Refer to “Changing the Playback Tempo for
MIDI Phrases (MIDI Playback Tempo)” (p. 60).
Playback Procedures
Manual Playback
1.
Insert a card containing recorded information into a slot.
2.
Turn the SELECT dial to choose the phrase number to
play. To switch between card slots A and B, press the
SELECT dial.
play. To switch between card slots A and B, press the
SELECT dial.
3.
• Press the PLAY button, and the phrase starts playing
back. During playback of the phrase, the PLAY indicator
lights up in green.
lights up in green.
• Pressing the STOP button ends playback.
• During playback, you can choose the next song to play
(without stopping the phrase being played) by turning
the SELECT dial.
the SELECT dial.
* Please be aware that you cannot pause a MIDI phrase.
Playback by Control Input
You can perform playback by control input and other means,
just as you can for audio phrases.
just as you can for audio phrases.
Controlling the AR-3000R from an External Device
→
AR-3000R_e.book 84 ページ ２０１０年３月１８日 木曜日 午後２時６分