Roland R-88 用户手册

If you are using an AC adaptor, you must set the external power 

supply select switch to “AC ADAPTOR.”

*  Place the AC adaptor so the side with the indicator (see 

illustration) faces upwards and the side with textual information 

faces downwards. 

The indicator will light when you plug the AC adaptor into an 

AC outlet.

*  Be sure to use the AC adaptor included with this product.

If you are using an external power supply, you must set the external 

power supply select switch to “EXT BATTERY.”

voltage.
The final voltage refers to the voltage when voltage can no longer 

be supplied because the capacity of the external power source is 

reduced and voltage decreases as electricity is consumed. 
If the final voltage is not properly set for the external power source, 

the remaining power display cannot be shown. Refer to the user’s 

manual of the external power supply for the final voltage value.
Furthermore, when the “Battery Low” message is displayed, the 

recording automatically stops, and the power automatically turns 

off. Change the external power source.

*  When using an external power source, even when power is 

automatically cut off, the R-88 starts within 30 seconds after 

power is turned back on. During this period, the final voltage 

settings can be changed.

*  Read the following to set the final voltage for the R-88.

Ú

<EXT POWER> is located on page 2/6. Touch 

 to access 2/6.

9.0 V, 9.5 V, 10.0 V, 10.5 V, 11.0 V, 11.5 V, 12.0 V 

You can also return to the home screen by touching 

 a number 

of times.

If an external power source is connected, the R-88 will not 

switch to battery operation even if the voltage of the external 

power source drops below the final voltage.

Make sure that the wiring of your external 

power source matches the R-88’s power supply 

connector. Be aware that malfunctions will occur 

if you connect an external power source that is 

wired differently.

Refer to the user’s manual for the external power source when using an 

external power source.