Roland R-88 用户手册

Limiter channel link is a function that lets you group multiple inputs 

so that the identical compression effect will be applied to all of 

those inputs when any input in that group exceeds the threshold 

level. The R-88 lets you create four such groups.

“LIMITER CH LINK” screen will appear.

Here’s how to adjust the sensitivity and input level of each input.

*  When recording in stereo, it is convenient to link the knobs of 

the left and right channels (p. 29).

*  The level cannot be adjusted for DIGITAL IN.

Turn on the inputs that you want to use for recording (p . 28) .

Use the [LEVEL]/[SENS] knobs (p . 6) to adjust the level and 

When you move a [SENS] knob, the current value will appear in the 

screen.

-56 dBu, -50 dBu, -44 dBu, -38 dBu, 
-32 dBu, -26 dBu, -20 dBu, -14 dBu,  
-8 dBu, -2 dBu, +4 dBu

While watching the level meter, adjust the level appropriately. If 

you are unable to obtain the appropriate level using only the [SENS] 

knob, use the [LEVEL] knob to adjust the input level.

*  If the LEVEL KNOB MODE (p. 20) is set to MIXER, the INPUT LEVEL 

is fixed at 0 dB.

Howling could be produced depending on the location of 

microphones relative to speakers. This can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.