Roland R-88 用户手册
Recording/Playback
42
Using a Footswitch to Remotely Control Recording or Playback
If a footswitch (BOSS FS-6 or FS-5U; sold separately) is connected, you can use your foot to control operations such as playback, recording, and
rewind.
CONTROL 1,2 jack
One of
these can be
connected.
POLARITY switch
When you connect one FS-5U
When you connect two FS-5Us
When you connect an FS-6
Stereo 1/4-inch phone type Stereo 1/4-inch phone type
Tip of the stereo 1/4-inch phone type
TIP
RING
MODE and POLARITY switches
OR
CTL1
CTL2
(Red)
(White)
CTL2
CTL1
CTL1
OR
1/4-inch phone type
1/4-inch phone type
Stereo 1/4-inch phone type 1/4-inch phone type x 2
Side Panel (Left)
MEMO
Never connect or disconnect a footswitch while this unit’s power is on.
Assigning a Function to the Footswitch
1.
Choose [MENU]
Ú
<SYSTEM SETUP>
Ú
<CTL1 FUNCTION>,
or <CTL2 FUNCTION> .
<CTL1 FUNCTION> and <CTL2 FUNCTION> are located on page
3/6. Touch
3/6. Touch
to access 3/6.
2.
Touch the function that you want to choose .
CTL 1/CTL 2
Explanation
STOP
Stop recording/playback.
REC
Start recording.
PLAY
Start playback.
FF
Fast-forward.
REW
Rewind.
REC/STOP
Alternately record or stop each time the footswitch
is operated.
PLAY/STOP
Alternately playback or stop each time the
footswitch is operated.
PLAY(MOMENT)
Play only while the footswitch is held down.
SET MARKER
Assign a marker.
PREV MARKER
Move to the previous marker.
NEXT MARKER
Move to the next marker.