VDO Dayton CD 2737 B 用户手册

22

You can use the Bluetooth in your car to make a 

phone call hands-free or stream music onto your 

in-car speakers (via this headunit).

PWR

MUTE

(n.a.)

Reject phone 

(incoming call)

-

TALK

Press more 

than 2 secs 

to start 

pairing

Answer phone 

(incoming call) 

Hang-up phone 

(call active)

Answer 

phone * 

(incoming 

call)

* Only when 'HFP 1ST‘ is selected inside the SAM.

To pair your Bluetooth-enabled device to this 

headunit, make sure that no device is currently 

streaming to this headunit first.

Press the 

TALK

 button for more than 2 seconds 

to enter the pairing mode. The headunit will 

enter into a “Find Me” mode.

Enable your device to perform a scan of 

available devices to find the headunit.

For more details, please check the user manual 

of your Bluetooth-enabled device.

3.  Once found, you should see “DAYTON” as 

the found device and you can pair your de-

vice with the headunit.

4.  The default 4-digit pin is “0000”.
Note: Whenever there is at least one paired 

device active, the headunit will light-up the Blue-

tooth icon.

This headunit is able to store up to eight Blue-

tooth-enabled devices (consisting of a mixture of 

mobile phones or music-players). If a ninth de-

vice starts pairing, it will replace the device that 

was used longest ago.

You will hear the ring tone from the in-car speak-

ers.

To answer the call, simply short-press the 

TALK

 

button.

If you do not wish to answer the incoming 

call, simply short-press the 

PWR

MUTE

 button.

1.

2.

1.

1.

After you have answered the phone call, and 

you wish to hang-up, simply short-press the 

TALK

 button again.

If your Bluetooth-enabled music device has al-

ready been paired with this headunit before, sim-

ply turn on the Bluetooth function of your music 

device and the headunit will react accordingly.

If 'A2DP 1ST' was selected in SAM, then the 

headunit will automatically switch to Blue-

tooth source and starts music streaming onto 

the in-car speakers.

If 'HFP 1ST' was selected in SAM, then the 

headunit will light-up the   (if not already 

lighted-up) only. You need to short-press the 

SOURCE

 button a few times to select Bluetooth.

If '1STDEVICE' was selected in SAM:

No Bluetooth connection active:- Behav-

iour is same as ‘HFP 1ST’ condition

An existing Bluetooth connection is ac-

tive:- status quo as the current Bluetooth 

connection is first connected.

This headunit comes with an Auxiliary input (3.5 

mm jack) on the front for ease of streaming your 

music from your portable devices.

Insert your 3.5 mm plug (connected to your 

portable device) into the front Aux input.
Short-press the 

SOURCE

 button a few times until 

the display shows “AUX”.

Play your portable device.

You can select automatic update of the clock 

via the RDS radio signal or manually adjust the 

clock yourself. The clock will be displayed when 

the headunit is powered-off. In case you need 

to save battery life, you may turn off the clock 

display too.

Navigate the SAM to select ‘CLOCK’.

Turn the knob clockwise / anti-clockwise to 

select the type of clock functions (RDS clock, 

manual clock or clock off).

Note: If you select ‘MAN CLK’, menu item, 

‘CLOCKSET’, is selectable as the next menu 

item. Refer to the ‘SOFTWARE ACCESS MENU 

(SAM)’ for adjusting the clock.

1.











1.

2.

3.

1.

2.