Kaito electronic KA800 用户手册
20
SET THE MW (AM) STEP & ALARM TIME
SET MW (AM) STEP (9K or 10K)
When in power off mode, Press & Hold the <M+/FOL+/DATE>
button until your desired MW (AM) step (10K or 9K) appears in
the display. Repeat again to change the MW (AM) tuning step.
Important: In the USA, the step for AM stations is 10K Hz.
You will miss stations if you do not have the right step set.
SET COUNTDOWN ALARM TIME (90 minutes
countdown alarm)
When in the power off mode, long Press & Hold the <REC>
button and rotate the <Tuning Knob> counter-clockwise at
the same time. The minutes and seconds will appear in the
bottom left corner of the display instead of date being
displayed and there is a running wait symbol <u> to the right
of the seconds. Then release the <REC> button and
continue rotating the <Tuning Knob> counter-clockwise or
clockwise to select your desired alarm time (01~90 minutes).
When you have finished, the alarm time then counts down in
the display. At the set alarm time, the alarm clock then rings.
It will ring for about 20 seconds. You can press any key to
exit the alarm clock mode.
button and rotate the <Tuning Knob> counter-clockwise at
the same time. The minutes and seconds will appear in the
bottom left corner of the display instead of date being
displayed and there is a running wait symbol <u> to the right
of the seconds. Then release the <REC> button and
continue rotating the <Tuning Knob> counter-clockwise or
clockwise to select your desired alarm time (01~90 minutes).
When you have finished, the alarm time then counts down in
the display. At the set alarm time, the alarm clock then rings.
It will ring for about 20 seconds. You can press any key to
exit the alarm clock mode.
If you want to cancel the alarm, before reaching the alarm
time, rotate the <Tuning Knob> clockwise until the time 00
minutes and then the date appears in the display.
minutes and then the date appears in the display.