Kompernass KH 2264 用户手册

9

t

Warning: Always press the STOP / EJ but-

ton first and let the tape stop before you

switch modes. This will prevent damage and

the device wearing out prematurely.

 The button symbols mean the following 

for tape mode:

 PLAY  = play a tape
❙❙ PAUSE  = stop/start pause

>> FFWD  = fast forward

<< REW  = rewind

● RECORD  = record
■ STOP/EJ  = stop and eject tape

The tape stops automatically at the end of

the tape. Remove the tape, turn it over, and

replace to play or record on the other side!

 Select "RADIO" on the FUNCTION
switch  .

When you find a radio station you want to

record from:

● Press RECORD to start recording.
❙❙ Press PAUSE  to pause the recording.
■ Press  STOP/EJ  to stop recording.

Note: The recording volume is controlled

automatically and is not determined by the

volume control switch.

 Select the "CD"  FUNCTION  switch.
● Press  RECORD  and simultaneously ...
❙❙ the  PAUSE  key  . The device is now rea

dy to record.

Press  PAUSE  (deactivate) again as soon

as the CD is started.

Press PAUSE again to interrupt recor

ding.

■ Press  STOP/EJ  to stop recording.

Note: The recording volume is controlled

automatically and is not determined by the

volume control switch.

Never open the device housing. There are

no operating elements inside. An opened

device housing could cause potential life

endangerment through electric shock.

Before cleaning the outside of the device,

…

• First remove the mains connector from

the mains socket.

 Select the "TAPE"  FUNCTION  to order

to switch the device off.

• If batteries are installed, remove them.

This may cause some or all preset radio

stations to be lost!

• Close all openings, i.e. the battery com-

partment, tape and CD trays.

• Clean all outside surfaces with a moist

but not wet cloth.

• Do not use any sort of aggressive clea-

ning fluids. These could damage the

external plastic housing.

KH2264_LB4_UK  17.11.2003  14:13 Uhr  Seite 10