Exabyte 440 用户手册
Chapter 2
16
Exabyte 440 and Exabyte 480
Installing the library hardw are
This section provides step-by-step instructions for installing the
library hardware. Use the following table as a checklist.
library hardware. Use the following table as a checklist.
✔
Step
Description
1
If you have a rack-mount model, install the library
into a rack.
into a rack.
2
Unlock and open the door.
3
Remove the packing foam.
4
Prepare and install cartridges.
5
Install the cartridge magazines.
6
Install a cleaning cartridge.
7
Close and lock the front door.
8
Connect the library to the SCSI bus.
9
Connect the pow er cord.
10
Pow er on the library.
:$51,1*
Before performing any installation or
maintenance procedures, be sure that the
library pow er switch is in the off position and
that the power cord is disconnected from the
library and the outlet.
maintenance procedures, be sure that the
library pow er switch is in the off position and
that the power cord is disconnected from the
library and the outlet.