Vertex Standard FTM-10R 用户手册

6. Insert the supplied 3-m Connection

Cable from the rear side of Rear Case
(Figure 7-), and then attach the Con-
nection Cable to the Rear Case using
the previously removed Binding Plate
(Figure 7-).

6. Attach the Connection Cable to the

Printed Circuit Board (Figure 8), and
then replace the Rear Case to the Front
Panel using the previously removed
four screws (Figure 9).

7. Connect the 8-pin modular plug of the

Connection Cable to the Transceiver
(Figure 10).

9. Mount the supplied Mobile Mounting

Bracket to the any position using the
supplied screws (Figure 11).

Figure 7

Figure 8

Figure 9

Figure 10

Figure 11

connector