Peavey QW 1 用户手册
SPECIFICATIONS QW
™
-1
M
Mo
ou
un
nttiin
ng
g
C
Ca
au
uttiio
on
n:: Before attempting to suspend
this speaker, consult a certified
structural engineer. This speaker can fall
from improper suspension, resulting in
serious injury and property damage. Other
enclosures may be suspended below a
QW-1, but the combined weight of
additional enclosures and all cables,
clamps and other hardware must not
exceed 296 lbs. The QW-1 weighs 154 lbs.
and the maximum combined weight
suspended from the uppermost mounting
bracket assemblies must not exceed 450
lbs. The maximum enclosure angle is 45˚.
Use only the correct mating hardware. All
associated rigging is the responsibility of
the user.
from improper suspension, resulting in
serious injury and property damage. Other
enclosures may be suspended below a
QW-1, but the combined weight of
additional enclosures and all cables,
clamps and other hardware must not
exceed 296 lbs. The QW-1 weighs 154 lbs.
and the maximum combined weight
suspended from the uppermost mounting
bracket assemblies must not exceed 450
lbs. The maximum enclosure angle is 45˚.
Use only the correct mating hardware. All
associated rigging is the responsibility of
the user.
A
Arrcch
hiitte
eccttu
urra
all a
an
nd
d e
en
ng
giin
ne
ee
erriin
ng
g
s
sp
pe
ecciiffiicca
attiio
on
ns
s
The loudspeaker system shall have an
operating bandwidth of 200 Hz to 18 kHz.
The nominal output level shall be 101 dB
when measured at a distance of 1 meter
with an input of 1 Watt. The nominal
impedance shall be 4 Ohms. The
maximum continuous power handling
shall be 600 Watts, with maximum
program power of 1200 Watts and peak
power input of at least 2400 Watts (with a
minimum amplifier headroom of 3 dB).
The nominal radiation geometry shall be
60˚ in the horizontal plane and 40˚ in the
vertical plane. The outside dimensions
shall be 48.5" high by 21" wide by 30.38"
operating bandwidth of 200 Hz to 18 kHz.
The nominal output level shall be 101 dB
when measured at a distance of 1 meter
with an input of 1 Watt. The nominal
impedance shall be 4 Ohms. The
maximum continuous power handling
shall be 600 Watts, with maximum
program power of 1200 Watts and peak
power input of at least 2400 Watts (with a
minimum amplifier headroom of 3 dB).
The nominal radiation geometry shall be
60˚ in the horizontal plane and 40˚ in the
vertical plane. The outside dimensions
shall be 48.5" high by 21" wide by 30.38"
deep. The weight shall be 154 lbs. The
loudspeaker system shall be a model
QW-1.
loudspeaker system shall be a model
QW-1.
3
3 +
+ 2
2 Y
YE
EA
AR
R L
LIIM
MIIT
TE
ED
D W
WA
AR
RR
RA
AN
NT
TY
Y
N
NO
OT
TE
E:: For details, refer to the
warranty statement. Copies of
this statement may be obtained
by contacting Peavey Electronics
Corporation, P.O. Box 2898, Meridian,
Mississippi 39301-2898.
this statement may be obtained
by contacting Peavey Electronics
Corporation, P.O. Box 2898, Meridian,
Mississippi 39301-2898.
3