Siemens SITRANS RD100 用户手册
7ML19985JU01
SITRANS RD100 – INSTRUCTION MANUAL
Page 1
SITRANS RD100 Loop Powered Meter
SITRANS RD100
SITRANS RD100 is a 2-wire loop powered, NEMA 4X enclosed remote digital display for
process instrumentation.
process instrumentation.
This digital meter is easy to use with a display of 3.5 digits, 1" (2.54 cm) high. It accepts 4 to
20 mA input and operates from -40 to +80 °C (-40 to +176 °F).
20 mA input and operates from -40 to +80 °C (-40 to +176 °F).
SITRANS RD100 is CSA and FM Approved.
Safety Notes
Special attention must be paid to warnings and notes highlighted from the rest of the text
by grey boxes.
by grey boxes.
The Manual
This manual provides specifications and instructions for the operation of SITRANS RD100
Remote Display. The manual is designed to help you get the most out of your Remote
Display, and it provides information on the following:
Remote Display. The manual is designed to help you get the most out of your Remote
Display, and it provides information on the following:
• Meter specifications
• Wiring diagrams
• Installation requirements
• Setup instructions
• Wiring diagrams
• Installation requirements
• Setup instructions
If you have any questions, comments, or suggestions about the manual content, please
email us at techpubs.smpi@siemens.com. For the complete library of Siemens Milltronics
manuals, go to www.siemens.com/processautomation.
email us at techpubs.smpi@siemens.com. For the complete library of Siemens Milltronics
manuals, go to www.siemens.com/processautomation.
WARNING: means that failure to observe the necessary precautions
can result in death, serious injury, and/or considerable material
damage.
can result in death, serious injury, and/or considerable material
damage.
CAUTION: means that failure to observe the necessary precautions can
result in considerable material damage.
result in considerable material damage.
Note:
means important information about the product or that part of the operating
manual.