La Crosse Technology TX31U-IT 用户手册

下载
页码 7
 
QUICK SET UP MANUAL –  
PROFESSIONAL WEATHER CENTER 
 
Using 915MHz wireless transmission of weather data, this unique weather station can 
be powered using batteries for all your weather needs in the home or office. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
INSTANT TRANSMISSION is the state-of-
the-art new wireless transmission 
technology, exclusively designed and 
developed by LA CROSSE TECHNOLOGY. 
INSTANT TRANSMISSION
 offers you an 
immediate update (every 4.5 seconds!)  
(every 6.5 seconds for rain!)  of all your 
outdoor data measured from the 
transmitters: follow your climatic variations 
in real-time!
 
This product offers: 
 
Carefully open and check that the following contents are complete: 
 
Item:
Consisting of: 
Fittings: 
Illustration:
Base Station
1) Main 
unit 
 
 
 
 
Thermo-
Hygro 
Sensor 
(TX31U-IT) 
1) Main 
unit 
2) Air 
Flow 
cover 
1) Wall 
mounting 
screws 
2) Plastic 
anchors 
for screws 
3) 2 
cable 
ties 
 
 
Wind Sensor
(TX23U) 
1) Main 
unit 
with wind 
vane 
2) 32 
ft 
cable 
(already 
attached the 
main unit) 
3) Mast 
holder 
1) 1 
U-bolts 
for 
mast holder 
2) 2 
Washers 
3) 2 
Nuts 
4) 2 
cable 
ties 
 
 
 
 
 
 
 
 
Cable connection between the wind sensor and the thermo-hygro sensor 
Wireless transmission 
at 915 MHz - thermo-
hygro and rain sensor 
to the Weather Center 
Weather Center 
Wind sensor 
Rain sensor
Rain Sensor 
(TX32U-IT) 
1) Base 
and 
       funnel 
 
1)  2 x Screws 
     and Plastic 
     anchors 
 
 
 
 
 
 
SETTING UP:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Sockets for wind sensor 
Note: 
When putting the Weather Center into operation, it is important to perform in close 
proximity (e.g. on a table) a complete wiring and set-up of the system. This step is 
important to test all components for correct function before placing and mounting them 
at their final destinations (See Positioning below). Spin the wind vane and tip the rain 
gauge to test. 
1. 
Unwind the cables of the Wind sensor. Connect the Wind sensor to the Thermo-
hygro transmitter by plugging the connector head into the socket of the Thermo-
hygro sensor. The cord should “click” into place. 
 
 
 
 
 
 
 
 
2. 
First insert the batteries into the Thermo-hygro sensor and Rain sensor (“How 
to install and replace the batteries into the Thermo-hygro sensor
“ and 
How to install and replace the batteries into the Rain sensor” below). 
3. 
Then insert the batteries into the Weather Center (see “How to install and 
replace the batteries into the Weather Center
 below). Once the batteries are 
installed, all segments of the LCD will light up briefly and a short signal tone will