Whirlpool W10388776A-SP 用户手册

 

■

Closet doors must have ventilation openings at the top  

and bottom of the door. The front of the dryer requires 

a minimum of 1" (25 mm) of airspace, and, for most 

installations, the rear of the dryer requires 5" (127 mm).  

See "Installation Instructions". 

© 2011 

 2/11

All rights reserved 

Printed in U.S.A.

 

■

Lint screen shold be cleaned before each load.

 

■

Run the dryer for 5-10 minutes. Hold your hand under 

the outside exhaust hood to check air movement. If you 

do not feel air movement, clean exhaust system of lint or 

replace exhaust vent with heavy metal or flexible vent. See 

"Installation Instructions".
Are fabric softener sheets blocking the grille? 

 

■

Use only one fabric softener sheet, and use it only once.
is the exhaust vent the correct length? 

 

■

Check that the exhaust vent is not too long or has too 

many turns. Long venting will increase drying times. See 

"Installation Instructions".
is the exhaust vent diameter the correct size?

 

■

 

Use 4" (102 mm) diameter vent material.
is the dryer located in a room with temperature below 

 

■

45°F (7°C)? 

Proper operation of dryer cycles requires temperatures above 

45°F (7°C).

Select a Timed Dry heated cycle, and restart the dryer.
If the message persists, have your entire home venting run 

cleaned.
“E” Variable (E1, E2, E3) service codes: 

 

■

Call for service. 

® Registered Trademark/TM Trademark of Whirlpool, U.S.A.,

Whirlpool Canada LP licensee in Canada

® Marque déposée/TM Marque de commerce de Whirlpool, U.S.A.,

Emploi sous licence per Whirlpool Canada LP au Canada

® Registered trademark/™ Trademark of Maytag Properties, LLC or its related companies.  

Used under license by Maytag Limited in Canada.  

® Marque déposée/™Marque de commerce de Maytag Properties, LLC  

ou de ses compagnies affiliées.  

Emploi sous licence par Maytag Limited au Canada.