Whirlpool W10563341A 用户手册

To avoid damaging floor, use a large flat piece of cardboard 

from dryer carton; place under entire back edge of dryer. 

Firmly grasp dryer body (not console panel) and gently lay 

dryer down on cardboard.

Examine leveling legs, find diamond marking. Screw legs into  

leg holes by hand, use a wrench to finish turning legs until 

diamond marking is no longer visible.
Now stand the dryer on its feet. Slide the dryer until it is 

close to its final location. Leave enough room for electrical 

connection and to connect the exhaust vent.

(NEMA Type 14-30R): Go to 4-wire  

Power Supply Cord Connection section. 

Then, go to Venting Requirements.

3-wire direct connection: Go to 3-wire 

Direct Wire Connection section. Then go 

to Venting Requirements.

4-wire direct connection: Go to 4-wire 

Direct Wire Connection section. Then go 

to Venting Requirements. 

(NEMA Type 10-30R): Go to 3-wire  

Power Supply Cord Connection section.   

Then go to Venting Requirements.

 If local codes do not permit connection of a 

cabinet-ground conductor to neutral wire, go to “Optional 

3-wire Connection” section. This connection may be 

used with either a power supply cord or a direct wire 

connection.