Whirlpool REX4634KQ0 用户手册

Select the correct cycle and temperature for your load.

Cool Down tumbles the load without heat during the last few 
minutes of all cycles to make the load easier to handle.

■

Follow care label directions when they are available.

■

If you use fabric softener sheets, use only those labeled 
“dryer safe.” Follow package instructions.

■

Remove the load from the dryer as soon as tumbling stops, to 
reduce wrinkling. This is especially important for permanent 
press, knits, and synthetic fabrics.

■

Dry most loads using the Energy Preferred Automatic 
Setting (

), if available on your dryer.

■

Use a High Heat setting for drying heavyweight items such as 
towels and work clothes.

■

Use a Medium Heat setting for drying medium weight items, 
such as sheets, underwear, permanent press fabrics, and 
some knits.

■

Use a Low Heat setting for drying lightweight items such as 
lingerie, blouses, dresses, and some knits.

■

Use a no-heat (air) setting for rubber, plastic, or heat-sensitive 
fabrics.

■

Line dry bonded or laminated fabrics.

 If you have questions about drying temperatures for 

various loads, refer to the care label directions. If you are unsure 
of the temperature to select for a load, select a lower setting 
rather than a higher setting.

This manual covers several different models. Your dryer may vary 
from the model shown and may not have all of the cycles and 
features described.

Use the automatic cycle to dry most loads. Your dryer uses the 
AUTO SENSE DRY automatic control that senses the moisture in 
the load and shuts off the dryer when the selected dryness is 
reached. The Cycle Control knob does not move until the load is 
almost dry. After the cool down, the knob automatically turns to 
an Off area and tumbling stops.

Dry most loads using the Energy Preferred Automatic Setting (

).

■

If the load is drier than you like, select a setting closer to 
Less Dry the next time you dry a similar load.

■

If the load is not as dry as you like, complete drying using the 
Timed Dry cycle. The next time you dry a similar load, select a 
setting closer to Very Dry. 

 Drying time with an automatic cycle varies according to 

the type of fabric, size of load, and temperature setting. See 
“Drying, Cycle and Temperature Tips.”

Use the Timed Dry cycle to complete drying if items are still 
damp after the automatic cycle.

Timed Dry is also useful for:

■

Heavyweight and bulky items, such as bedspreads and work 
clothes and large loads that require a long drying time. Set 
the Temperature selector to High heat or to a setting that 
matches the care label directions.

■

Lightweight items, such as lingerie, blouses, and knits that 
require a short drying time. Set the Temperature selector at 
Low heat.

 Drying time and temperature will depend on your dryer 

model. 

Select this setting to evenly dry large or heavy items, such as 
thick cotton bath towels or robes. Set the Temperature selector, if 
available, to High heat.

Select this setting to dry items to a damp level or dry items that 
do not require an entire drying cycle. Damp dry items such as 
jeans (to prevent stiffness) or cotton clothes (to make pressing 
easier). Set the Temperature selector, if available, to High heat.

Use this setting to remove wrinkles from items, such as clothes 
packed in a suitcase or items wrinkled from being left in the dryer 
too long. Set the Temperature selector, if available, at Low or 
Medium heat, depending on the fabrics in your load.