Maytag MGDB200V 产品宣传页
Gas Dryer
PRODUCT MODEL NUMBERS
W10388777
06/2011
MGDB200V, MGDB400V, MGDB700V,
MGDB800V, MGDB850W
MGDB800V, MGDB850W
NOTE: Most installations require a
minimum of 5" (127 mm) clearance
behind dryer for exhaust vent with
elbow. See “Venting Requirements”.
Dryer with extended back:
Dryer with flat back
:
Back view:
Bottom view:
Recommended Installation Spacing:
Spacing for recessed area or closet installation
All dimensions show recommended spacing allowed, with tested spacing of 0" (0 mm) clearance
on sides and rear.
■
Additional spacing should be considered for ease of installation and servicing.
■
Additional clearances might be required for wall, door, and floor moldings.
■
Additional spacing should be considered on all sides of the dryer to reduce noise transfer.
■
For closet installation, with a door, minimum ventilation openings in the top and bottom of the
door are required. Louvered doors with equivalent ventilitation openings are acceptable.
■
Companion appliance spacing should also be considered.