Kenwood PKT-23K 用户手册

10

◆  Even when setting the volume to 0, the transceiver will continue 

to emit beep sounds and channel announcements.

◆  Continuously transmitting when the transceiver becomes too 

hot will cause the output power to decrease and may eventually 
stop transmission. Stop transmitting for a while to allow the 
transceiver to cool down.

◆  You may sometimes hear noise during communications, 

depending on the caller’s transceiver.

Red

Transmitting

Green

Receiving a call

Blinking green

Scanning

Blinks light blue 1 time

Standby state *

Blinking red

Battery power is low

*  The transceiver has not been used for at least 10 seconds.

You can determine the remaining battery power level by 
pressing the Power switch while the transceiver power is 
ON. The LED indicator will blink blue a number of times 
corresponding to the battery power remaining.

Blinks 3 times

High

Blinks 2 times

Medium

Blinks 1 time

Low

The Time-out Timer prevents callers from using a channel for 
an extended duration (60 seconds). If you continuously transmit 
for the duration, transmission will stop and an alert tone will 
sound. To stop the tone, release the PTT switch.