Canon 320EX 用户手册
31
When the Speedlite is attached to an EOS-1D series camera, you can
also set the flash exposure level manually.
also set the flash exposure level manually.
1
Set the camera and Speedlite settings.
Setting the camera’s shooting mode to <f> or <a> is
recommended.
recommended.
Set [Flash mode] to [Manual flash] for the Speedlite.
2
Focus the subject.
Focus manually.
3
Set up an 18% gray card.
Place the gray card at the subject’s position.
In the viewfinder, the entire spot metering circle at the center should
cover the gray card.
cover the gray card.
4
Press the <7> button.
(
8
)
X
The Speedlite will fire a preflash and the required flash output for the
subject is retained in memory.
subject is retained in memory.
X
On the right side of the viewfinder, the exposure level indicator will
show the flash exposure level for the correct flash exposure.
show the flash exposure level for the correct flash exposure.
5
Set the flash exposure level.
Adjust the Speedlite’s manual flash level and the camera
aperture so that the flash exposure level aligns with the
standard exposure index.
aperture so that the flash exposure level aligns with the
standard exposure index.
6
Take the picture.
Remove the gray card and take the picture.
Metered Manual Flash Exposures