Olympus 50 用户手册

 

13

 

The sync cord is a 5 pin Nikonos type sync cord. The sync cord connects the flash to the camera housing. 

Both ends of the cord are identical so either side can be inserted into the flash and camera housings. 

When you insert the cord into the port you must exercise caution—the pins inside the cord are delicate and 

must not be damaged. 

1.  Unscrew the port cover cap and store in a safe place. Gently and accurately attach the sync 

cord to the port of the flash housing. 

2.  While securing the position of the sync connector, screw it into the housing using the locking 

screw of the sync cord. 

Caution 

On the side of the housing port notice a simple alignment indicator [dot]. 

The 5 pin cord contains a small channel [groove] between 2 of the female 

pins of the cord. 

You must insert the cord into the port so the groove is aligned with the 

indicator of the housing. This assures proper alignment. Hold firmly in place 

while fastening locking screw.