ARRI ARRIFLEX 235 用户手册

•  By briefly depressing the “PHASE”-button in standby, 

the shutter is positioned to protect the mirror surface 

from damage as far as possible 

➪ 

.

•  Before exchanging the ground glass, switch the 

camera’s main switch off and disconnect the camera 

from the power supply!

•  Remove the lens or the protective cap.

•  Using the included special forceps, pull the ground glass 

➪ 

 out of the holder by its tongue 

➪ 

.

•  Check that the ground glass to be inserted as well as 

the ground glass frame are completely clean.

•  With the special forceps, push the chosen ground glass 

into the holder as far as it will go. The red marker 

point must be on the left. A ball catch fixes the ground 

glass exactly in the right position.

•  Check that the ground glass is correctly locked in place.

Note: 

Cleaning or exchanging the field lens, see 

Chapter 13 Maintenance, Cleaning the Field Lens.

tongue

ground glass