ARRI ARRIFLEX 235 用户手册

•  Turn the adjustment knob 

➪ 

 until it locks in 

position. Do not depress the locking key.

Note: 

The automatic image compensation locks in two 

positions, 180° apart. This allows the image 

compensation to be set to provide an upright 

image when using a finder extension.

If the viewfinder image is inverted without the finder 

extension, the image compensation must be adjusted to 

the opposite locking position.

•  Depress the locking key 

➪ 

 and keep 

depressed.

•  Turn the adjustment knob 

➪ 

.

•  Release the locking key 

➪ 

.

•  Keep turning the adjustment knob 

➪ 

 until this 

locks in position.

Before removing the viewfinder system, the viewfinder 

arm should be brought back to its normal position.

•  Loosen the three fastening screws 

➪ 

.

•  Pull the viewfinder system up and off.

•  Position the viewfinder system on the camera body 

from above.

•  Tighten the fastening screws.

fastening screws