Canon EOS REBEL T2i 用户手册
208
With a commercially-available Eye-Fi card already set up, you can
automatically transfer captured images to a personal computer or
upload them to an online service via a wireless LAN.
The image transfer is a function of the Eye-Fi card. To set up, use the
card and to troubleshoot any image transfer problems, refer to the Eye-
Fi card’s instruction manual or inquire the card’s manufacturer.
automatically transfer captured images to a personal computer or
upload them to an online service via a wireless LAN.
The image transfer is a function of the Eye-Fi card. To set up, use the
card and to troubleshoot any image transfer problems, refer to the Eye-
Fi card’s instruction manual or inquire the card’s manufacturer.
This product is not guaranteed to support Eye-Fi card
functions (including wireless transfer). In case of an issue
with an Eye-Fi card, please check with the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in
many countries or regions. Without approval, use of the card
is not permitted. If it is unclear whether the card has been
approved for use in the area, please check with the card
manufacturer.
functions (including wireless transfer). In case of an issue
with an Eye-Fi card, please check with the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in
many countries or regions. Without approval, use of the card
is not permitted. If it is unclear whether the card has been
approved for use in the area, please check with the card
manufacturer.
1
Insert an Eye-Fi card.
(p.31)
2
Select [Eye-Fi settings].
Under the [5] tab, select [Eye-Fi
settings], then press <0>.
settings], then press <0>.
This menu is displayed only when an
Eye-Fi card has been loaded in the
camera.
Eye-Fi card has been loaded in the
camera.
3
Enable the Eye-Fi transmission.
Press <0>, set [Eye-Fi trans.] to
[Enable], then press <0>.
[Enable], then press <0>.
If you set [Disable], automatic
transmission will not occur even with
the Eye-Fi card loaded (Transmission
status icon I).
transmission will not occur even with
the Eye-Fi card loaded (Transmission
status icon I).
4
Display the connection
information.
information.
Select [Connection info.], then press
<0>.
<0>.
Using Eye-Fi Cards
COP
Y