Canon EOS 550D 用户手册

138

You can prevent the beeper from sounding when focus is achieved or 
during self-timer operation.

Under the [1] tab, select [Beep], then 
press <0>. Select [Disable], then 
press <0>.

This prevents shooting if there is no card in the camera.

Under the [1] tab, select [Release 
shutter without card], then press 
<0>. Select [Disable], then press 
<0>.
If there is no card installed and you press 
the shutter button, “Card” will be 
displayed in the viewfinder, and you 
cannot release the shutter.

You can set how long the image is displayed on the LCD monitor 
immediately after capture. If [Off] is set, the image will not be displayed 
immediately after image capture. If [Hold] is set, the image review will 
be displayed up until the [Auto power off] time. During the image 
review, if you operate any camera controls such as pressing the shutter 
button halfway, the image display will end.

Under the [1] tab, select [Image 
review], then press <0>. Select the 
desired review time, then press <0>.

3

3

3

COP

Y