Canon EOS 550D 用户手册
31
The captured images are recorded onto the card (sold separately).
Make sure the card’s write protect switch is set upward to
enable writing/erasing.
enable writing/erasing.
1
Open the cover.
Slide the cover as shown by the
arrow to open it.
arrow to open it.
2
Insert the card.
As shown by the illustration, face
the card’s label side toward you
and insert it until it clicks in place.
the card’s label side toward you
and insert it until it clicks in place.
3
Close the cover.
Close the cover and slide it in the
direction shown by the arrow until it
snaps shut.
direction shown by the arrow until it
snaps shut.
When you set the power switch to
<1>, the number of possible shots
will be displayed on the LCD monitor.
<1>, the number of possible shots
will be displayed on the LCD monitor.
Installing and Removing the SD Card
Installing the Card
Write protect switch
Possible shots
The number of possible shots depends on the remaining capacity of the
card, image-recording quality, ISO speed, etc.
card, image-recording quality, ISO speed, etc.
Setting the [1 Release shutter without card] menu option to [Disable]
will prevent you from forgetting to install a card (p.138).
will prevent you from forgetting to install a card (p.138).
COP
Y