Canon EF 50mm f/1.8 II 业主指南

CT1-7513-013

2008.5

3. Hood (Sold Separately)

The ES-62 lens hood can keep unwanted light out of the

lens, and also protects the lens from rain, snow, and dust.

The supplied hood adapter is required when mounting the

ES-62 lens hood.

1) Screw the hood adapter onto the filter mounting thread

of the lens.

2) Attach the hood to the hood adapter

❺

The hood can be reverse-mounted on the lens for storage.

4. Filters (Sold Separately)

You can attach filters to the filter mounting thread on the

front of the lens.

• Only one filter may be attached.

• When using the hood, screw the filter onto the hood

adapter.

• Use a polarizing Canon filter (52mm).

Specifications

Angle of

View

Diagonal

46°

Vertical

27°

Horizontal

40°

Lens Construction

5 groups, 6 elements

Minimum Aperture

f/22

Min. Focusing Distance

0.45 m/1.5 ft.

Max. Magnification and

Field of View

0.15×/160 × 240 mm/6.3 ×

9.4 inch (at 0.45 m/1.5 ft.)

Filter Diameter/Usable

Number

52 mm/1

Max. Diameter and Length

68.2 × 41 mm

2.7 × 1.6 inch

Weight

130 g/4.6 oz

Hood

ES-62 (with hood adapter:

sold separately)

Case

LP1014 (sold separately)

The lens length is measured from the mount surface to

the front end of the lens. Add 21.5 mm when including

the lens cap and dust cap.

The size and weight listed are for the lens only, except as

indicated.

Aperture settings are specified on the camera.

All data listed is measured according to Canon

standards.

Product specifications and appearance are subject to

change without notice.

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such changes

or modifications should be made, you could be required to stop

operation of the equipment.

This equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to part 15 of the FCC

Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for

help.

This Class B digital apparatus complies with Canadian ICES-003.

COP