Canon 2512A002 产品宣传页

CT1-8536-003 

1208SZ 

 © CANON INC. 2006

●

❽

●

❾

●

●

You can attach filters to the filter mounting thread on the front of 

the lens.

•  Use a polarizing Canon filter.

There is a gelatin filter holder at the rear of the lens. Cut the gelatin

filter to fit within the white frames. Then insert the gelatin filter into 

the filter holder 

❽

.

The lens hood can keep unwanted light out of the lens, and also

protects the lens from rain, snow, and dust.

Fit the hood to the hood mount, then turn it in the direction of the

arrow to attach it securely.

To attach the hood, align the hood’s attachment position mark

with the red dot on the front of the lens, then turn the hood in the

direction of the arrow until the lens’s red dot is aligned with the

hood’s stop position mark

❾

.

Press the buttons on both sides of the hood to attach 

.

Pull the hood out from the front of the lens until it stops

.

The hood can be reverse-mounted on the lens for storage.

•  Part of the picture may be blocked if the hood is not attached

properly.

•  When attaching or detaching the hood, grasp the base of the

hood to turn it. To prevent deformation, do not grasp the rim of

the hood to turn it.

n

  The lens length is measured from the mount surface to the front 

end of the lens. Add 21.5 mm to include the E-58U/E-72U lens

cap and dust cap, and 24.2 mm for the E-58 II/E-72 II.

n

 The size and weight listed are for the lens only, except as

indicated.

n

 Aperture settings are specified on the camera.

n

 All data listed is measured according to Canon standards.

n

 Product specifications and appearance are subject to change

without notice.

n

 Case and hood not provided with some models.

n

 Filters sold separately.

This device complies with Part 15 of the FCC Rules. Operation 
is subject to the following two conditions: (1) This device may 
not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause 
undesired operation.
Do not make any changes or modifications to the equipment 
unless otherwise specified in the instructions. If such changes 
or modifications should be made, you could be required to stop 
operation of the equipment.
This equipment has been tested and found to comply with the 
limits for a class B digital device, pursuant to part 15 of the FCC 
Rules.
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if 
not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur 
in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the 
following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Consult the dealer or an experienced radio/TV technician for

help.

This Class B digital apparatus complies with Canadian ICES-003.

Angle of view

Lens 

construction

Minimum 

aperture

Max. magnification and field of view

Min. focusing 

distance

Filter 

diameter

Max. diameter and length

Weight

Hood

Case

Diagonal

Vertical

Horizontal

EF14mm f/2.8L USM

114°

81°

104°

10-14

22

0.10X/246 × 375 mm (9.7” × 14.8”) 0.25 m/0.82 ft.

*1

77 × 89 mm (3.0” × 3.5”)

560 g/19.6 oz.

*2

LP1016

EF20mm f/2.8 USM

94°

62°

84°

9-11

22

0.14X/176 × 264 mm (6.9” × 10.4”) 0.25 m/0.82 ft.

72 mm

77.5 × 70.6 mm (3.1” × 2.8”) 405 g/14.2 oz.

EW-75II

LP1214

EF24mm f/1.4L USM

84°

53°

74°

9-11

22

0.16X/150 × 227 mm (5.9” × 8.9”)

0.25 m/0.82 ft.

77 mm

83.5 × 77.4 mm (3.3” × 3.1”) 550 g/19.4 oz.

EW-83DII

LP1214

EF28mm f/1.8 USM

75°

46°

65°

9-10

22

0.18X/139 × 212 mm (5.5” × 8.3”)

0.25 m/0.82 ft.

58 mm

73.6 × 55.6 mm (2.9” × 2.2”) 310 g/10.9 oz.

EW-63II

LP814

EF35mm f/1.4L USM

63°

38°

54°

9-11

22

0.18X/136 × 206 mm (5.4” × 8.1”)

0.3 m/0.98 ft.

72 mm

79 × 86 mm (3.1” × 3.4”)

580 g/20.5 oz.

EW-78C

LP1214

EF50mm f/1.4 USM

46°

27°

40°

6-7

22

0.15X/164 × 249 mm (6.5” × 9.8”)

0.45 m/1.48 ft.

58 mm

73.8 × 50.5 mm (2.9” × 2.0”) 290 g/10.2 oz.

ES-71II

LP1014

EF85mm f/1.8 USM

28°30’

16°

24°

7-9

22

0.13X/191 × 287 mm (7.5” × 11.3”) 0.85 m/2.79 ft.

58 mm

75 × 71.5 mm (3.0” × 2.8”)

425 g/14.9 oz.

ET-65III

LP1014

EF100mm f/2 USM

24°

14°

20°

6-8

22

0.14X/175 × 262 mm (6.9” × 10.3”)

0.9 m/2.95 ft.

58 mm

75 × 73.5 mm (3.0” × 2.9”)

460 g/16.1 oz.

ET-65III

LP1014

EF200mm f/2.8L USM

12°

7°

10°

7-9

32

0.16X/152 × 226 mm (6” × 8.9”)

1.5 m/4.92 ft.

72 mm

83 × 136.2 mm (3.3” × 5.4”) 790 g/27.7 oz.

*2

LH-D18

*1 Built-in gelatine filter holder
*2 Built-in

COP

Y