JVC LYT0002-0N4B 用户手册

EN 

No indication 
(Auto)

MWB

This camcorder’s Automatic Colour Temperature system
senses the colour temperature of the ambient lighting for
automatic white balance adjustment. However, precise
colour adjustment is not possible under the following
conditions:
•When an object is in various shades of the same colour.
•When a predominantly red or brown object is being

shot outdoors.

In these cases, use the camcorder’s built-in preset filters
for white balance adjustment.

SELECT MODE

Turn the PROGRAM AE select dial to any position
except AUTO LOCK.

SELECT FUNCTION

Press SEL. repeatedly until “

” appears.

SELECT WHITE BALANCE

Press SET (Manual White Balance) until the
required indication appears in the LCD monitor or
the viewfinder.

“MWB” .... With a memorized personal White

Balance setting (see below)

“

” ......... Outdoors on sunny day

“

” ........ Outdoors on cloudy day

“ ” ......... Light source is halogen or tungsten lamp

MWB sets the colour temperature for the subject’s light
source so you can shoot with natural colours that are
unaffected by surroundings, even when there are
multiple subjects with different colour temperatures.

SELECT MODE

Turn the PROGRAM AE select dial to any position
except AUTO LOCK.

ADJUST FOCUS

Point the camcorder at a white, flat object such as a
sheet of white paper, and adjust focus manually
(

Z

 pg. 23).

ADJUST WHITE BALANCE

Press SET until “MWB” appears, then press and hold
SET for more than 3 seconds.

•“MWB” blinks in the LCD monitor or the view-

finder during adjustment, then stops blinking but
stays lit when adjustment is complete.

● To switch to automatic white balance

adjustment, press SET until the indication
disappears, or turn the PROGRAM AE select
dial to “AUTO LOCK”.

● Re-adjust the White Balance when the lighting

has changed, when the camcorder has been
turned off and on again, or when the PRO-
GRAM AE select dial’s position has been
changed.

● When adjusted by putting coloured paper in

front of the subject in step 2 (“ADJUST
FOCUS”), this unit makes its colour tempera-
ture standard for automatic white balance. So
you can enjoy shooting with different colours.
For example, when adjusting with red, blue or
yellow colours, the image becomes the colour
which aproximates to green, orange or purple
respectively.

● Manual White Balance Adjustment is not

possible when the PROGRAM AE dial is set to
SEPIA (

Z

 pg. 21).