JVC LYT2473-002A 用户手册
Card
Cannot insert the SD card.
Make sure not to insert the SD card in the wrong direction.
Unable to copy to SD card.
To use SD cards that have been used on other devices, it is necessary to
format (initialize) the SD card using “FORMAT SD CARD” from media
settings.
Playback
Sound or video is interrupted.
Sometimes playback is interrupted at the connecting section between two
scenes. This is not a malfunction.
There is no sound.
When the Silent mode is used, operation and playback sounds will not be
output. Turn off the Silent mode.
Set “OPERATION SOUND” in the common menu to “ON”.
Audio sound is not recorded for videos taken in HIGH SPEED RECORDING/
TIME-LAPSE RECORDING.
The same image is displayed for a long time.
Use a high speed SD card (Class 4 or higher).
Clean the terminals of the SD card with a dry cotton swab or something
similar.
Execute “FORMAT SD CARD” in the “COMMON” menu. (All data will be
deleted.)
The motion is choppy.
Use a high speed SD card (Class 4 or higher).
Clean the terminals of the SD card with a dry cotton swab or something
similar.
Execute “FORMAT SD CARD” in the “COMMON” menu. (All data will be
deleted.)
Verify the system requirements of your computer when using Everio
MediaBrowser to play back.
Cannot find a recorded file.
Cancel the date search function.
Select “PLAYBACK OTHER FILE” in the menu. (Video files that have
damaged management information can be played back.)
Images recorded in 60p mode and 60i mode are displayed on the index
screen separately. To view videos recorded in the 60p mode or 60i mode,
set “SYSTEM SELECT” to “60p” or “60i” respectively, followed by setting to
the playback mode.
Images do not appear on the TV properly.
Disconnect the cable and connect again.
Turn off and on this unit again.
Images are projected vertically on the TV.
Set “VIDEO OUTPUT” in the “COMMON” menu to “4:3”.
Adjust the TV's screen accordingly.
The image displayed on TV is too small.
Set “VIDEO OUTPUT” in the “COMMON” menu to “16:9”.
When connected to the TV via the HDMI mini cable, proper
images and sounds are not output.
Images and sounds may not be output properly depending on the TV
connected. In such cases, perform the following operations.
A
A
Disconnect the HDMI mini cable and connect it again.
Troubleshooting
214