JVC GC-FM2 用户手册

46

Before requesting service, consult the following chart. If the solutions indicated in the 

chart do not solve the problem, consult your nearest JVC dealer or JVC service center 

for instructions.

Refer also to the FAQ section on JVC’s website (http://www.jvc.com).


 The following phenomena are not malfunctions.

•

 LCD monitor momentarily becomes red or black when sunlight is recorded.

•

 Black spots, or red, green, or blue spots appear on the LCD monitor. 

(The LCD monitor contains 99.99% effective pixels, but 0.01% or fewer pixels may be 

ineffective.)

The camera is a microcomputer-controlled device. Electrostatic discharge, external 

noise and interference (from a TV, a radio, etc.) might prevent it from functioning 

properly. In such a case, reset the camcorder by pressing and holding the Power 

•

 Recharge the battery.

•

 When the battery level is extremely low, the 

camcorder does not turn on until it is charged even 

if it is connected to the computer or AC adapter.

14

15

•

 Check the remaining battery power. (When the 

battery is fully charged, the lamp does not flash.)

•

 If you were charging the battery in a low or high 

temperature environment, charge in an 

environment within the allowable operating 

temperature. (Charging may stop in an environment 

out of the allowable operating temperature for the 

protection of the battery.)

•

 When charging using the computer, turn on the 

computer.

14, 15

–

–

•

 Please use a JVC AC adapter (optional: AC-V10LU). 

(Depending on the AC adapter you use, battery will 

deplete due to insufficient power supply from the 

adapter.)

15

•

 Please use a JVC AC adapter (optional: AC-V10LU).

15