Fujifilm F11 用户手册

107

106

1 The “Found New Hardware” help message

appears in the bottom-right corner of your screen.
This message will close when the settings are
completed. No action is required.

●

This step is not required for subsequent connections.

Proceed to “USING FinePixViewer” on P.109.

◆

◆

The next time you connect the camera, the removable disk drive icon’s name changes to the
“FinePix” icon and name.

2 A new removable disk icon appears in the “My Computer” window.

FinePixViewer automatically starts up and the Save Image Wizard window (Save Image
dialog box) appears. Follow the instructions provided on screen to save the images. To
proceed without saving the images, click the [Cancel] button.

●

The Windows CD-ROM may also be required during installation. In this event, change CD-ROMs as directed by the
on-screen instructions.

h FinePixViewer automatically starts up and the

Save Image Wizard window (Save Image
dialog box) appears. Follow the instructions
provided on screen to save the images. To
proceed without saving the images, click the
[Cancel] button.

✽ Screen for Windows 2000 Professional

h A removable disk icon appears and you can use

your PC to transfer files to and from the camera.

Windows

Macintosh

If the above operations do not occur, you do not have the required software programs or drivers installed
on your PC. Complete the required PC setup procedures. Then reconnect the camera to your PC.

Plug the terminal adapter into the terminal adapter
connection socket on the camera.
Press the “

w

” button for about 1 second to turn the

camera on in Playback mode.

h When the camera and PC are exchanging data,

the indicator lamp blinks orange and self-timer
lamp blinks red.

h “

¶

DSC” appears on the LCD monitor.

h Auto power off is disabled during USB

connection.

●

Before replacing the xD-Picture Card, always disconnect the
camera from the PC. See P.108 for information on the
disconnection procedure.

●

Do not disconnect the USB cable (mini-B) when the camera
is communicating with a PC. See P.108 for information on the
disconnection procedure.

1 Turn your PC on.
2 Connect the terminal adapter to your PC using

the USB cable (mini-B).

◆

◆

If “CHECKING USB” appears and then
[COMMUNICATION ERROR] is displayed on the
LCD monitor, “

¶

” (DSC mode) is not selected in

“

ò

”USB MODE. Unplug the terminal adapter and

restart the procedure from step 

.

CHECKING USB

CHECKING USB

PICTBRIDGE

PICTBRIDGE

●

Make sure that the USB cable (included) is connected
correctly and pushed in.