Fujifilm HS10 用户手册
89
Men
u
s
Using the Menus: Shooting Mode
J
J AE BKT EV STEPS
AE BKT EV STEPS
Choose the size of the exposure bracketing incre-
ment used when
ment used when
O (AE BKT) is selected in contin-
uous shooting. Choose from increments of ±
1
/
3
EV,
±
2
/
3
EV, and ±1 EV (for an explanation of the term
“EV,” see the Glossary on page 128).
I
I FLASH
FLASH
Adjust fl ash brightness. Choose from values be-
tween +
tween +
2
/
3
EV and –
2
/
3
EV (the default setting is ±0).
Note that the desired results may not be achieved
depending on shooting conditions and the dis-
tance to the subject.
depending on shooting conditions and the dis-
tance to the subject.
g
g EXTERNAL FLASH
EXTERNAL FLASH
Choose ON when using an optional fl ash unit
mounted on the camera hot shoe.
mounted on the camera hot shoe.
c Cautions
• Maximum shutter speed is
• Maximum shutter speed is
1
/
4000
s. The fl ash may not
fully light the subject at speeds faster than
1
/
1000
s.
• Use auto or custom white balance (pg. 53).
• If the built-in fl ash is raised when ON is selected for
• If the built-in fl ash is raised when ON is selected for
g EXTERNAL FLASH, the built-in fl ash will fi re once
to provide a signal for the optional fl ash unit to fi re.
to provide a signal for the optional fl ash unit to fi re.
a Note
The camera can be used with fl ash units that provide
aperture adjustment, external metering, and sensitivity
control. Some fl ash units that are designed specifi cally
for other cameras can not be used.
The camera can be used with fl ash units that provide
aperture adjustment, external metering, and sensitivity
control. Some fl ash units that are designed specifi cally
for other cameras can not be used.