Ricoh R 3 用户手册
90
Note
• When shooting with S Multi- or M Multi-Shot, the ISO sensitivity is fixed to AUTO even if it is
set to 64,100.
• The maximum number of images that can be shot in the Multi-Shot mode depends on the
image size setting as follows:
• The numbers of images that can be shot in the Multi-Shot mode with the built-in memory
are as shown in the table below.
• When shooting images consecutively using an SD memory card, the shot images can be
recorded normally until the SD memory card becomes full. Once the number of
consecutively shot images exceeds the value shown in the table above, however, the
image recording speed becomes slow. (This depends on the image size setting.)
consecutively shot images exceeds the value shown in the table above, however, the
image recording speed becomes slow. (This depends on the image size setting.)
1.
Switch the Mode Selector to 5.
2.
Press the M/O button.
The Shooting Setting menu appears.
3.
Press the " button to select [CONT] and press the $ button.
4.
Press the !" buttons to select
[CONT], [SCONT], or [MCONT].
[CONT], [SCONT], or [MCONT].
5.
Press the M/O or # button.
6.
If you pressed the # button in
step 5, press also the M/O
button.
step 5, press also the M/O
button.
The Shooting Setting menu closes and
the symbol is displayed at the top of the
screen.
the symbol is displayed at the top of the
screen.
F2592
N2592
3:2
F2048
N2048
F1280
N1280
N640
Digital Zoom: Off
7
7
7
6
6
13
13
13
Digital Zoom: On
6
6
6
6
6
13
13
13