Ricoh R4 用户手册
124
Changing the Playback Method for Viewing
on TV (VIDEO OUT MODE)
You can view your still images and movies on a television screen by
connecting your camera to a television with the AV cable that came
with your camera.
Your camera is set to NTSC video format (used in Japan and other
countries) for use with television equipment and other audiovisual
equipment. If the equipment you want to connect to uses PAL format
(used in Europe and elsewhere), then switch your camera to PAL
format before connecting.
connecting your camera to a television with the AV cable that came
with your camera.
Your camera is set to NTSC video format (used in Japan and other
countries) for use with television equipment and other audiovisual
equipment. If the equipment you want to connect to uses PAL format
(used in Europe and elsewhere), then switch your camera to PAL
format before connecting.
To change the playback format, follow the steps below.
1.
Display the SETUP menu.
For the operating procedure, see P.111.
2.
Press the " button to select [VIDEO OUT MODE] and press
the $ button.
the $ button.
3.
Press the !" buttons to select
the desired setting.
the desired setting.
4.
Press the C/D or # button.
5.
If you pressed the # button in
Step 4, press also the C/D
button.
Step 4, press also the C/D
button.
This setting is used until it is changed.
Note
When the AV cable is connected to the camera, the LCD monitor turns off.
Reference
For information on how to view still images on your television screen, see P.48.
Available Settings
NTSC *Default setting
PAL
PAL