Ricoh 16599 用户手册

62

3

You can use Exposure Bracketing to take 2 (standard exposure 
and underexposure, or standard exposure and overexposure), 
3 or 5 images with different exposure levels.
This function can be used with Continuous Shooting, Self-timer, 
or Remote Control set by pressing A.

1

Turn Q while pressing 5 
to set the number of shots.

Check the setting on the LCD panel.

Right (clockwise)

OFF→3→5→2→-2→OFF

Left (counterclockwise) OFF→-2→2→5→3→OFF

2

Turn R while pressing 5 to set the bracket 
value.

Press M while pressing 5 to return to [OFF] and [--].

3

Select [OFF] in Step 1 to finish shooting with Exposure Bracketing.

• Set the auto bracketing order with [8. Bracketing Order] in the E2 

menu. (

w

p.R40)

• Set the EV step interval with [1. EV Steps] in the E1 menu. 

(

w

p.R39)

• Set [9. One-Push Bracketing] in the E2 menu to shoot all frames 

with one press of the shutter release button. (

w

p.R40)

• If you take your finger off the shutter release button before shooting 

of the set number of images is completed, the next bracket setting 
will remain effective for twice the amount of the exposure metering 
time.

• You can combine Exposure Bracketing with the P-TTL auto flash 

to change the flash output continuously. Confirm that the flash unit 
is fully charged before shooting each frame.

• This function is not available in M mode.
• This function cannot be used with Multi-exposure, Interval 

Shooting, or Interval Composite. The function set last is used.

5

±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0

±0.5, ±1.0, ±1.5, ±2.0

5 images at 1.0 EV

2 images (underexposed) at 0.3 EV