Ricoh Caplio RX 用户手册

下载
页码 183
12
1
• The number of shots is for reference only. 
If the camera is used for long periods od 
time for setting and playback, the shooting 
time (the number of shots) will decrease.
• Other batteries, such as manganese dry 
cell (R6) and Ni-Cd, cannot be used.
• Please remove the batteries if you are not 
going to use the camera for a long period 
of time.
• The life of an AA alkaline battery (LR6) 
depends on the brand and the storage time 
from the date of production. In addition, the 
life of an alkaline battery becomes shorter 
at low temperatures.
• The Nickel-Hydrogen Battery is not fac-
tory-charged. Charge it before use. Imme-
diately after the purchase or after a long 
storage, the battery may not be charged 
fully. Repeat charging and discharging 
before use. For details, see the documen-
tation that came with the battery or 
charger.
• The battery may become very hot immedi-
ately after operation. Turn the camera off 
and leave it to cool down sufficiently before 
removing the battery.
Battery level indication
A battery mark appears at the lower left of 
the LCD monitor to indicate the battery level. 
Prepare new batteries before the batteries 
wear out.
If you are using nickel metal hydride batter-
ies, 
 may not appear or 
 or 
 may appear immediately depending 
on the battery type and environmental condi-
tions. Check the batteries at hand before 
use.
Using the Batteries
If you have already used this camera, make 
sure it is turned off before loading batteries.
1.
Make sure the camera power is
off.
2.
Open the battery/card cover.
The cover slides open in two steps.
First slide the cover toward the face of 
the camera, then lift it to expose the bat-
tery compartment.
3.
Insert the two batteries, making 
sure they are facing the correct 
way..
4.
Close the battery/card cover and 
slide it back into place.
Battery Mark
Description
Sufficient battery charge
Low remaining charge: Prepare new batteries.
No remaining charge: Replace the batteries.