JAI TMC-4200GE 用户手册
Page 11
TM-4200GE Software
Configuring the TM-4200GE Camera
3.2.1 GUI Features
You can control the following camera functions using the integrated camera software.
•
Shutter Speed and Mode
•
Scan Mode
•
Gain Control
•
Offset Level
•
Memory Pages
•
LUT (Look-Up Table) Control
•
8, 10, 12-bit Selectable
•
Trigger Input Location and Polarity
•
Digital Zoom
•
Pixel Compensation
3.3 Configuring the Internal Frame Grabber
The integrated camera software updates the internal frame grabber settings automatically. Also,
because the internal frame grabber configuration is independent of the imager configuration, you can
set up (that is, “window”) the internal frame grabber separately, for example, the Image Settings tab in
the integrated camera software. This has the added benefit of reducing unnecessary traffic on the GigE
network, and freeing bandwidth for other cameras.
because the internal frame grabber configuration is independent of the imager configuration, you can
set up (that is, “window”) the internal frame grabber separately, for example, the Image Settings tab in
the integrated camera software. This has the added benefit of reducing unnecessary traffic on the GigE
network, and freeing bandwidth for other cameras.
3.4 Modes
This section includes examples of various types of setup actions available through the camera
configuration dialog box.
configuration dialog box.
3.4.1 Check the Current Camera Setting
You can manually send camera commands from the Serial Free Form tab of the Configuration window
shown in Figure 12. Use the serial port and click the CR check box. Enter :RPST and click Send to get
the current camera setting. For detailed information about the current camera setting, refer to Table 4 on
page 27.
shown in Figure 12. Use the serial port and click the CR check box. Enter :RPST and click Send to get
the current camera setting. For detailed information about the current camera setting, refer to Table 4 on
page 27.