Ikelite D-230 用户手册

Congratulations on your purchase of an Ikelite Digital Camera

Housing. Ikelite has over 30 years of experience in the underwater

photographic and lighting market. Our products are designed and

built in the USA by Ikelite for both the professional and amateur

photographer.

The clear housing permits instant visual inspection of the camera

and all sealing surfaces as well as complete monitoring of controls

and camera LCD screens.

This housing has been water pressure tested at the factory.

Housing is pressure tested to 125’ (38m).

Ikelite Digital Housing

i n s t r u c t i o n m a n u a l

#6138 for Olympus D-230

Shutter Release

Shutter Lock

Lens Port

Housing
Latch

Lock

Accessory
Shoe

Locking Latch

Accessory Shoe

Shutter Button

Thumb Rest

Tray Mounting Shoes

Latch

Monitor

Arrow Pad

Hoouussiinngg FFrroonntt

Hoouussiinngg BBaacckk

Lock

Push back on
Lock and Rotate
the Latch open

Hinge

Oppeenniinngg tthhee H

Hoouussiinngg

Push back on the lock and lift the latch. Unhook the latch from the

front of the housing. The two halves of the housing will now swing

open.

Oppeenniinngg tthhee H

Hoouussiinngg

Hook

Latch

Hinge

Shutter
Release Arm

Foam Spacer

Camera

IInnssttaalllliinngg tthhee CCaam

meerraa

Slide the camera’s Lens Barrier OPEN, this turns the camera ON.

OTTEE::

There is no provision in the housing for sliding the Lens

Barrier once the camera is in the housing.

With the housing face down place the right edge of the camera

into the housing as far forward as possible and against the foam

spacer on the right. Gently push the left edge of the camera into

the housing with the base of the camera against the bottom of the

housing. The top foam spacer and the front rubber spacers hold the

camera in position.

IInnssttaalllliinngg tthhee CCaam

meerraa