Pentax 10916 用户手册

203

6

4

The camera turns on in video mode, and the camera information is 
displayed on the screen of the connected AV device. 

When the hometown is set at the time of initial setting (p.58), the video 
output format is set in accordance with that region. Depending on the 
country or region, images may fail to be played back with the set video 
output format. If this happens, change the setting. 

1

Select [Interface Options] in the [R Set-up 2] menu, and 
press the four-way controller (5). 

The [Interface Options] screen appears. 

2

Use the four-way controller (23) to select [Video Out], 
and press the four-way controller (5). 

3

Use the four-way controller (23) to select [NTSC] or 
[PAL], and press the 4 button. 

4

Press the 3 button twice. 

The screen that was displayed before selecting the menu item appears again.

• You cannot adjust the volume on the camera while the camera is connected 

to an AV device. Adjust the volume on the AV device. 

• Movies are played back with monaural sound. 
• Images are output at normal resolution regardless of the resolution supported 

by the AV device. To output HD video, transfer to and play back on a 
computer. 

The video output format differs depending on the region. When you set [Time 
Setting] in the World Time setting (p.209) to X (Destination), the video output 
setting changes to the video output format for that city. Refer to “List of World 
Time Cities” (p.211) for cities that can be selected as a hometown or 
destination.