Pentax 10916 用户手册

97

4

Choose the part of the sensor to use for measuring brightness and 
determining exposure.

1

Press the M button in standby mode.

The control panel appears. 

2

Use the four-way controller (2345) to select [AE 
Metering], and press the 4 button. 

The [AE Metering] screen appears. 

3

Use the four-way controller (45) 
to select a metering method, and 
press the 4 button. 

The camera returns to the control panel. 

L

Multi-

segment

The sensor meters the brightness in multiple zones. (default setting)

Even in backlit locations, this mode automatically determines what level 

of brightness is in which portion and automatically adjusts exposure.

M

Center-

weighted

Metering is weighted at the center of the sensor.

The sensitivity increases at the center and no automatic 

adjustment is performed even during backlit scenes.

N

Spot

The brightness is measured only within a limited area at the center 

of the sensor. You can use this in combination with AE Lock (p.96) 

when a subject is too small to obtain a correct exposure.

• You can also change the setting from the [A Rec. Mode 1] menu. 
• Exposure metering is performed immediately after the camera is turned on or 

when the capture mode is changed. Set the length of meter operating time in 
[3. Meter Operating Time] of the [A Custom Setting 1] menu. Select from 
[10sec.] (default setting), [3sec.] or [30sec.]. 

• In [5. Link AE and AF Point] of the [A Custom Setting 1] menu, you can link 

the exposure and AF point in the focusing area when L is selected.

Off

Exposure for multi-segment metering is determined regardless of 
the AF point. (default setting)

On Exposure for multi-segment metering is adjusted according to the AF point.