Pentax 10720 用户手册
2
Gettin
g
Starte
d
24
3
Close the battery cover.
Pull out the connection cable
from the connection cable cover
section.
from the connection cable cover
section.
4
Connect the DC coupler and the AC adapter.
5
Connect the AC adapter to the AC plug cord, and
plug the cord into the power outlet.
plug the cord into the power outlet.
u
Caution
• Make sure the camera is turned off before connecting or
disconnecting the AC adapter.
• Make sure connections are secure between the terminals.
The memory card or data may be corrupted if the connection
to the power supply is lost while the card is being accessed.
to the power supply is lost while the card is being accessed.
• After removing the DC coupler, return the connection cable
cover to its original position.
• Be sure to read the manual of the AC adapter kit before using
the AC adapter.
This camera uses a commercially available SD Memory Card,
SDHC Memory Card, or SDXC Memory Card. An SD Memory
Card with a built-in wireless LAN (Eye-Fi card) can also be
used. (In this manual, they are referred to as memory cards.)
SDHC Memory Card, or SDXC Memory Card. An SD Memory
Card with a built-in wireless LAN (Eye-Fi card) can also be
used. (In this manual, they are referred to as memory cards.)
1
Make sure that the camera is turned off.
2
Slide the card cover in the
direction of 1.
direction of 1.
3
Insert the card all the way
with the memory card label
facing toward the monitor.
with the memory card label
facing toward the monitor.
Push the memory card in once to
remove.
remove.
Inserting a Memory Card
2
1