Philips 220X 用户手册

Subject to technical alterations, as well as to changes of the design and the colour

230 mm + projector height

335 mm + projector height

at the projektor bottom, with fixing screws (M3/M4/M5/M6),
          drill-holes between 138 and 378 mm diameter

up to 120 cm

up to 250 cm

ca. 32 kg (w/o projector)

ca. 38 kg (w/o projector)

                            max. 45 x 65 x 20 cm

max. 30 kg

max. 20 kg

                                230 V / 50 Hz

                                690 x 490 mm

                               740 x 540 mm

                             adjustable steel plate

                     metallic silver grey (RAL 9006)

ceiling plate white (RAL 9003)

22

Professional ceiling lift with low noise movements

Lifting range up to 340 cm

For projectors of up to 30 kg weight

Super flat universal projector holder, tiltable

Maintenance-free Somfy motor

Special protection of all cables

Safety switch

Press the button and the projector is lowered and ready for use. The exact
position of the unit can be pre-selected.
A safety switch stops the lift on its way down when hitting an obstacle.
For a cutout of the ceiling of min. 74 x 54 cm. Easy mounting.
An optional side panelling (No. 7465-10) is available for mounting the
lift directly on the ceiling.
A special device for protecting all projector connections and a 4-pin
cable are supplied with each unit.
The lift can be operated by up/down switch, remote or conference
control.

Note:
Lifts with lifting range up to 340 cm on demand.

Ceiling lifts allow you to install your
data/video projector in a false ceiling,
e.g. of a conference or lecture room. If
not in use the projector is hidden behind
the panelling of the ceiling and thus
protected against theft.

for visible mounting on the ceiling,
4 parts, height 40 cm, white colour

for holding the cutout panelling,

 note different size of cutout

752x552 mm

for mounting the projector in an upright

 position (e.g. Sanyo EF/XF 60),
 note different size of cutout 800x600 mm

for special holder No. 7465-30,

 note different size of cutout 812x612 mm

Controls the fan when the ceiling lift is up
and the safety switch has cut off the power;
up to 10 additional minutes of fan
operation; inputs 230 VAC and safety
switch; output 230 VAC for power supply
of the projector; for Wieland socket system
GST 18.

ceiling lift Pro 120
ceiling lift Pro 250

projector dim. max.
450x650x200 mm

dim. X= projector height + min. 50 mm                           dim. in mm

ceiling lift Pro 120

lifted = min. 180 mm

unlifted = max. 1380 mm

ceiling lift Pro 250

lifted = min. 285 mm

unlifted = max. 2785 mm

Durability proved by long-term testing

Endurance test with double load

Free of electro-magnetic interferences

Corrosion resistant

by KINDERMANN