Philips 220X 用户手册
Subject to technical alterations, as well as to changes of the design and the colour
36
INSTALLATION ACCESSORIES
AV Share Basic 4 : 1
No. 7481
Video selector for RGB Video, S-Video, Composite Video, Stereo Audio, Digital Audio
1 input / 4 outputs
(Scart RGB, 4pin Mini-Din, 3xCinch, Toslink, all f)
(Scart RGB, 4pin Mini-Din, 3xCinch, Toslink, all f)
Plastic casing 60x65x25 mm
Power supply DC 9-12 V, 200 mA
Supplied with IR remote control, S-Video cable, Scart cable, Cinch connection cable
Splitters for video/audio signals
AV Share Basic 4 : 1 Remote
No. 7481-3
AV splitter Pro 1 : 3
No. 7481-1
Splitters for video signals
Signal splitter for Composite Video and Stereo Audio
1 input / 3 outputs (3x3 Cinch / f)
Frequency Video 430 MHz, Audio 100 kHz @ - 3dB
Adjustable Audio level, Video level and cable EQ
Metal casing 165x120x45 mm
Power supply DC 12 V, 50 mA
1 input / 2 outputs (4 pin MiniDin / f)
Frequency 150 MHz @ - 3dB
Adjustable Video level (separate for Y&C)
Metal casing 60x65x25 mm
Power supply DC 12 V, 30mA
TV Tuner PV500
No. 7486
TV Tuners / Progressive Scan Converters
Converts a projector or a TFT display into a TV and Video in VGA signals (SVGA/XGA)
Can be used as TV Tuner with video text, Progressive Scan Converter, Video Scaler,
VGA/Video switcher
VGA/Video switcher
Adaptive 2D filter for Y/C partition
Philips SAA7118 Chip
A2/NICAM Stereo Sound Decoder
Inputs: aerial / cable), Composite Video (Cinch), S-Video (4 pin-Mini-Din), VGA
(HD15 / f), 1 Stereo Cinch, 1 Stereo jack
(HD15 / f), 1 Stereo Cinch, 1 Stereo jack
Outputs: VGA (HD 15 f), Stereo jack
Output signal VGA, SVGA, XGA - 60/75 Hz
Remote control and power supply
Accessories
IR Link
No. 5822-5
Extends the range of IR remote controls.
Extension cable for IR signals sent by remote controls, consisting of:
Extension cable for IR signals sent by remote controls, consisting of:
IR receiver
Connector block with power supply 12 V DC
IR Emitter with 2 IR diodes
Cable IR receiver -> Connector block ca. 2 m*
Cable connector block -> IR Emitter ca. 3 m
* Extension possible with 3pin cable 5698-11
Time controlled mains separation of projectors
(after ca. 5 min. in standby mode)
(after ca. 5 min. in standby mode)
High voltage protection
Max. power 460 W
Power consumption < 1 W
230 V AC / 50 Hz
Output Schuko plug
Separates the projector from the mains after ca. 5 minutes of operation in standby mode.
The integrated IR receiver switches the projector back to standby when it gets an IR signal.
If the signal is not meant for the projector, it will be separated again.
The integrated IR receiver switches the projector back to standby when it gets an IR signal.
If the signal is not meant for the projector, it will be separated again.
ECOMAN Beamer
No. 7487
No. 7481-5
S-Video Splitter Pro 1 : 2
No. 7481-4
Audio splitter Pro 1 : 2
Selector for Composite Video, S-Video and Stereo Audio as well as Video converter
4 inputs / 1 output (4 pin MiniDin, 3 x Cinch, all f)
S-Video - > Composite Video converter
Composite Video - > S-Video converter
Plastic casing 190x115x50 mm
1 input / 2 outputs (3.5 mm jack / f)
Frequency 100 kHz @ - 3dB
Adjustable Audio level (separate for left & right)
Metal casing 60x65x25 mm
Power supply DC 12 V, 30mA