Panasonic NV-GS180EB 用户手册

下载
页码 64
Before using
19
VQT0T87
ª
Remote control usable range
≥The distance between the remote control and 
the camera: Within approx. 5 m
Angle: Approx. 10
o up and 15o down, left, and 
right
ª
Selecting the remote control mode
If 2 cameras are used simultaneously, set the 
mode for one pair of movie camera and remote 
control to [VCR1] and that of the other pair to 
[VCR2]. This will prevent interference between 
the 2 pairs. (The default setting is [VCR1]. When 
the button-type battery is replaced, the setting will 
revert to the default [VCR1].) 
1
Setting on the camera:
Set [SETUP] >> [REMOTE] >> [VCR1] or 
[VCR2].
2
Setting on the remote control:
[VCR1]:
Press [
D] and [] simultaneously. 1
[VCR2]:
Press [
E] and [] simultaneously. 2
ª
Concerning the button-type battery
≥When the button-type battery runs down, 
replace it with a new battery (part number: 
CR2025). The battery is normally expected to 
last about 1 year, but it depends on operation 
frequency.
≥Keep the button-type battery out of the reach of 
children.
≥If the remote control mode of the camera and 
that of the remote control do not match with 
each other, “REMOTE” will appear. When the 
remote control is operated for the first time after 
the camera is turned on, “CHECK REMOTE 
MODE” (
-48-
) will appear and operation is 
impossible. Set the same remote control mode.
≥The remote control is intended for indoor 
operation. Outdoors or under strong light, the 
movie camera may not operate properly even 
within the usable ranges.
≥Within a 1 metre range, you can operate the 
remote control from beside the remote control 
sensor (LCD monitor side) of the movie camera.
2
1
VQT0T87ENG.book  19 ページ  2005年10月28日 金曜日 午後6時43分