Panasonic DMC-FX35 用户手册

VQT1P09

Using one of these modes, jitter during picture taking is detected, and the camera automatically 
compensates the jitter, enabling jitter-free images to be taken.

ñ·¿n

The stabilizer function may not be effective in the following cases.

When there is a lot of jitter.

When the zoom magnification is high.

In digital zoom range.

When taking pictures while following a moving subject.

When the shutter speed becomes slower to take pictures indoors or in dark places.

Be careful of camera jitter when you press the shutter button.

The setting is fixed to [MODE2] with [SELF PORTRAIT] in scene mode and to [OFF] in 
[STARRY SKY] in scene mode.

It cannot be set to [OFF] in the Intelligent auto mode.

In motion picture mode, [MODE2] cannot be set.

You can take a picture brightly in dark places by setting [MIN. SHTR SPEED] slower. Also, you 
can set it faster to reduce the blur of the subject.

·

This should usually be set to [1/8 ] to take pictures. (When you select a minimum shutter speed 
other than [1/8 ], [

] appears on the screen.)

Setting [MIN. SHTR SPEED]  to slower speed might increase the chance of jitter, so we 
recommend using a tripod and the self-timer for taking pictures.

Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommend 
recording the picture in well-lit area. If correct exposure cannot be achieved, [

] will flash in 

red when the shutter button is pressed halfway.

 [STABILIZER]

[MODE1]:

Jitter is always compensated during [REC] mode.

[MODE2]:

The jitter is compensated for when the shutter button is pressed.

 [MIN. SHTR SPEED]

Darker

Brighter

Less

More

DMC-FX35P_mst.book  65 ページ  ２００８年１月１５日　火曜日　午前１０時３６分