Panasonic DMC-GM1 用户手册

下载
页码 350
148
6. Focus and Brightness (Exposure) Settings
Displaying the MF Assist
It can be displayed by rotating the focus ring, pinching out 
 the screen, or touching the 
screen twice. (In [Miniature Effect] of Creative Control Mode, it cannot be displayed by touching 
the screen)
It can also be displayed by pressing 2 of the cursor button to display the MF area setup 
screen, using the cursor button to decide the MF area position, and then pressing [MENU/
SET].
Closing the MF Assist
It will close when the shutter button is pressed halfway.
You can also close MF Assist by pressing [MENU/SET] or touching [Exit].
It will also close when the screen is touched twice.
When displayed by rotating the focus ring, it is closed approximately 10 seconds after 
operations are stopped.
MF Assist or MF guide may not display depending on the lens used, but you can display MF 
Assist by direct operation of the camera, using the touch screen or a button.
Not available in these cases:
The MF Assist is disabled when using the Digital Zoom or recording motion pictures.
When using an interchangeable lens (H-H020A) with 
a focus ring
1
Set the focus mode lever to [MF].
2
Rotate the focus ring to focus.
Rotate to A side:
Focuses on nearby subject
Rotate to side:
Focuses on faraway subject
E MF Assist (enlarged screen)
F MF Guide
G Peaking
When using an interchangeable lens with a focus 
lever, move the focus lever to focus.
A
B
AF
+
F
G
E