Panasonic VQT2X42 用户指南

VQT2X42 (ENG)

(ENG) VQT2X42

Camera care and the waterproof

performance

(Continued)

Opening and closing the card/battery door and terminal cover

At the time of purchase, the [LOCK] switches of the card/battery door and

terminal cover are in the locked position.

■

[LOCK] switch position

: Locked position

: Unlocked position
: [LOCK] switch

: Terminal cover

: Card/Battery door

■

To open

Slide the [LOCK] switch in the direction of

the arrow until the red area ( ) is visible

The lock is unlocked.

Slide the release lever ( ) to the [LOCK]

switch side

The card/battery door and terminal cover open.

■

To close

While the [LOCK] switch is unlocked,

push the card/battery door and terminal

cover closed until they click

•To prevent water from entering the camera,

make sure that no foreign objects are trapped in

the card/battery door and terminal cover, such

as liquid, sand, hair or dust.

•If the door or cover is closed while the [LOCK]

switch is locked, it may cause damage or let

water enter the camera.

Lock the [LOCK] switch by sliding it in

the direction of the arrow until the red

area is no longer visible

•If the camera is used while a door or cover is

not closed properly, it may open.

Causes of water entering the camera

When the camera is used in the following conditions, a gap may be

formed between the camera and the card/battery door or terminal cover,

allowing water to enter and causing a malfunction.

•When the rubber seal has deteriorated

•When the [LOCK] switch of the card/battery door or terminal cover is

not locked

•When foreign objects such as lint, hair or sand are adhered to the inner

side of the card/battery door or terminal cover (rubber seal or rubber

seal contact area) and are trapped

: Foreign object
: Terminal cover

: Rubber seal

: Rubber seal contact

area

: Card/Battery door

A gap forms and

allows water to

enter