Panasonic DMC-TZ10 用户手册

16   

VQT2R48

VQT2R48

   17

( The Clock is not set when the 

camera is shipped.)

Pictures remaining (

 →174, 

 →176)

Displayed when no card is inserted (pictures will be saved to built-in 

memory)

Remaining battery (only when using battery)

(flashes red)

If the battery mark flashes red, recharge or replace battery. (→11)

 (Card) or 

 (Built-in memory) are illuminated red.

While the light remains lit, an operation is taking place, such as picture writing, reading, 
deletion or formatting. While the light is lit, do not turn off the power or remove battery, 
card, AC adaptor (optional) or DC coupler (optional) (this can cause data loss or 
damage). Do not subject the camera to vibrations, impact, or static electricity. Should 
any of these cause camera operation to be terminated, attempt to perform the operation 
again.

Pictures will be saved to a card if one is inserted, or to the built-in memory 

 if not.

■

●

 

●

The access time for the built-in memory may be longer than the access time for a card.

 

●

Clipboard pictures (→110) are saved to built-in memory.

 

●

[QVGA] in [REC QUALITY] can only be available to record motion pictures in the built-
in memory.

■

Compatible memory cards (optional)
The following SD standard-based cards (Panasonic brand recommended)

SD memory 

cards

8 MB – 2 GB

 

• Can be used with devices compatible with the respective 

formats.

 

• Before using SDXC memory cards, check your computer 

and other devices support this type of card.

http://panasonic.net/avc/sdcard/information/SDXC.html

 

• Cards in capacities not listed at left are not supported. 

SDHC memory 

cards

4 GB - 32 GB

SDXC memory 

cards

48 GB - 64 GB

 

●

Please reformat the card with this camera if it has already been formatted with a 
computer or another device. (→28)

 

●

If the write-protect switch is set to ‘LOCK’, the card cannot be used to 
record or delete pictures, and it cannot be formatted.

 

●

It is recommended that you copy important pictures to your computer (as 
electromagnetic waves, static electricity, or faults may cause data to be damaged).

 

●

Latest information: 
http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)

The power is turned on.
If the language select screen is not 
displayed, proceed to step  .

 

• The [PLEASE SET THE CLOCK] message 

appears. (This message does not appear in 

Playback Mode.)

Select the 

setting 

item

Select either [24HRS] or [AM/

PM] for the time display format.

Select the display order for the 

day, month, and year ([M/D/Y], 

[D/M/Y], or [Y/M/D]).

Change 

the values 

and 

settings

 

• To cancel → Press  .

 

• When set to [AM/PM], 0:00 midnight is AM 12:00, 

and 0:00 noon is PM 12:00.

 

• To return to the previous screen, press  .

Set REC/PLAY switch to 

 before turning on the power.

REC/PLAY switch

Switch 

(LOCK)

(Continued on the next page)

For the operating procedures for the DMC-TZ8/DMC-ZS5 (→19)