Panasonic DMC-TZ10 用户手册
58
VQT2R48
VQT2R48
59
This mode of recording lets you set any aperture value and shutter speed when exposure
adjustment prevents you from recording at the desired exposure (brightness/darkness).
Also, long-exposure recording of up to 60 seconds is possible.
adjustment prevents you from recording at the desired exposure (brightness/darkness).
Also, long-exposure recording of up to 60 seconds is possible.
Set to
(recording)
Set to
([MANUAL EXPOSURE] Mode)
• Manual exposure assist is displayed. (About
10 seconds)
Determine aperture and shutter
speed
◄►: Adjust aperture value
▲▼: Adjust shutter speed
▲▼: Adjust shutter speed
• When the picture is too bright
or too dark or there is incorrect
exposure, the numbers for the
aperture value and shutter speed
are shown in red.
exposure, the numbers for the
aperture value and shutter speed
are shown in red.
• If the shutter is pressed halfway,
manual exposure assist is
displayed. (About 10 seconds)
displayed. (About 10 seconds)
Aperture value/shutter speed
■
Aperture values and shutter speeds that can be set
Aperture value
Shutter speed (seconds)
F4.0 - F6.3
60 - 1/2000
F3.5
60 - 1/1600
F3.3
60 - 1/1300
• Aperture values that can be set vary depending on the zoom position. (The above table
is at Max. W.)
■
Manual exposure assist (estimate)
Shows pictures with standard brightness.
Shows brighter pictures. For standard brightness, either use a faster
shutter speed or increase aperture value.
Shows darker pictures. For standard brightness, either use a slower
Shows darker pictures. For standard brightness, either use a slower
shutter speed or reduce aperture value.
●
LCD monitor brightness may vary from the actual still picture recorded.
●
In Manual Exposure Mode,
cannot be set.
Determine aperture and shutter speed and record
[MANUAL EXPOSURE] Mode
Recording Mode:
Registering your preferred Recording Mode, [REC] menu settings, etc. to [CUST.SET
MEM.] and setting the mode dial to
MEM.] and setting the mode dial to
allows you to switch quickly to those settings.
[CUST.SET MEM.] Registering your own settings
Up to 3 current camera settings can be registered.
■
Recording Mode:
Select the Recording Mode
you wish to register and set
the [REC] menu, [SETUP]
menu, etc.
Select [CUST.SET MEM.]
Select [CUST.SET MEM.]
from the [SETUP] menu
(→22)
Select the custom set to
Select the custom set to
register
Select [YES]
Close the menu
●
The following menus and functions are saved in the custom set.
[REC] menu / Recording Functions
[SETUP] menu
[PICTURE SIZE]
[QUALITY]
[ASPECT RATIO]
[INTELLIGENT ISO]
[SENSITIVITY]
[WHITE BALANCE]
[FACE RECOG.] (ON/OFF
only)
[AF MODE]
[PRE AF]
[METERING MODE]
[I.EXPOSURE]
[MIN. SHTR SPEED]
[BURST]
[I.RESOLUTION]
[DIGITAL ZOOM]
[COLOR EFFECT]
[PICT.ADJ.]
[STABILIZER]
[AUDIO REC.]
[AF ASSIST LAMP]
[RED-EYE REMOVAL]
[REC MODE]
Exposure Compensation
[AUTO BRACKET]
[MULTI ASPECT]
[GUIDE LINE]
[HISTOGRAM]
[ZOOM RESUME]
Register your own settings and record
[CUSTOM] Mode
Recording Mode: