Panasonic HDC-Z10000P 用户手册
139
VQT3U98
∫ If scenes do not change smoothly when played back on another
device
The images may be still for several seconds at the joins between the scenes if the following
operations are performed when multiple scenes have been continuously played back using
another unit.
≥ Just how smoothly the scenes will be played back depends on the playback unit.
operations are performed when multiple scenes have been continuously played back using
another unit.
≥ Just how smoothly the scenes will be played back depends on the playback unit.
Depending on the unit used, the images may stop moving and become still for a moment
even when none of the following conditions are applicable.
even when none of the following conditions are applicable.
≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at
every 4 GB of data when played back with another device.
≥ It may not play back smoothly when the editing of scenes was done with the HD Writer XE
1.0, but it will play back smoothly if you set the seamless settings in the HD Writer XE 1.0.
Refer to the operating instructions for the HD Writer XE 1.0.
Refer to the operating instructions for the HD Writer XE 1.0.
About recovery
If faulty management information is found, the messages may appear and a repair is
performed. (Repairing may take time depending on the error.)
≥
performed. (Repairing may take time depending on the error.)
≥
is displayed when abnormal management information is detected when the scenes
are displayed in thumbnail.
≥ Use a sufficiently charged battery or the AC adaptor.
≥ Depending on the condition of the data, it may not be possible to completely repair the
≥ Depending on the condition of the data, it may not be possible to completely repair the
data.
≥ If recovery fails, it will not be possible to play back scenes recorded before the unit turned
off.
≥ When data recorded on another device is recovered, it may not be possible to play back
the data on this unit or the other device.
≥ If recovery fails, turn the unit off and on again after waiting awhile. If recovery fails
repeatedly, format a media on the unit. Please be aware that if a media is formatted, then
all the data recorded on the media will be erased.
all the data recorded on the media will be erased.
≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.
Principal reasons for not playing back smoothly
≥ When the scenes were recorded on different dates
≥ When scenes lasting under 3 seconds have been recorded
≥ When PRE-REC was used for recording
≥ When scenes lasting under 3 seconds have been recorded
≥ When PRE-REC was used for recording
≥ When deleting scenes
≥ When scenes recorded more than 99 scenes on the same date
≥ When scenes recorded more than 99 scenes on the same date
HDC-Z10000P-VQT3U98_mst.book 139 ページ ２０１１年１０月４日 火曜日 午後３時２分